Description:
The electromechanical hygrostat MRF012 is designed to control enclosure heaters , so that the dew point is raised when a critical relative humidity of 65% is exceeded. In this way condensation and corrosion is effectively prevented.
Specifications:
Switch difference:4% RH (±3% tolerance)
Permissible air velocity:15m/sec
Contact type:change-over contact
Contact resistance:< 10mOhm
Service life:> 100 000 cycles
Min. switching capacity: 20V AC/DC 100 mA
Max. switching capacity: 250 VAC, 5 (1) A DC 20W
EMC: acc. to EN 55014-1-2, EN 61000-3-2, EN 61000-3-3
Connection:3-pole terminal for 2.5mm⊃2;, clamping torque 0.5Nm max.: rigid wire 2.5mm⊃2;,stranded wire (with wire end ferrule) 1.5mm⊃2;
Mounting: clip for 35mm DIN rail, EN50022
Casing: plastic according to UL94 V-0, light grey
Dimensions: 67 x 50 x 38mm
Fitting position: variable
Operarting/Storage temperature: 0 to +60°C (+32 to +140°F) / -20 to +80°C (-4 to +176°F)
Protection type: IP20
Note:
Item color displayed in photos may be showing slightly different on your computer monitor since monitors are not calibrated same.
Please allow 1-3mm slight deviation due to manual measurement. Thank you!
Package include:
1pc Humidity ControllerUTA♥Mechanical＃Hygrostat＃Humidity＃Controller＃Connect＃Fan＃for＃Cabinet＃MFR012